The alternator on a Chrysler van is what prices the battery whereas the engine is operating. To work round some areas contained in the engine compartment, you will have to remove the alternator. Eradicating the alternator from any Chrysler van will probably be mainly the identical course of and use the identical instruments. About the one distinction you will note between vans is the location of the alternator on the totally different engines and ranging bolt sizes.
Chrysler Van Alternator Removal Instructions
1. Tighten a pair of adjustable pliers onto the securing nut of the battery’s constructive cable and loosen the nut. Pull the battery’s constructive cable off of the battery.
2. Find the strain pulley behind the alternator. The strain pulley has a small black curler on the underside of it that forces the drive belt onto an engine pulley. Join the pliers to the arm on the highest of the strain pulley the identical approach that you simply linked them to the battery cable.
3. Pull the pliers in direction of the front of the engine to pressure the curler on the strain pulley off of the drive belt. Take away the drive belt from the alternator pulley by pulling it off of the alternator.
4. Take away the bolts from the rear of the alternator that safe the alternator to the engine with a field wrench set. Two bolts safe the alternator and are located on the rear higher and lower sides of the alternator.
5. Unscrew the bolt that secures the wire to the aspect of the alternator with an appropriate-sized size box wrench. Pull the wire from the alternator then pull the alternator out of the engine.
Read more : Alternator Removal Instructions for a Chrysler Van
